Acrylic Sanding Sealer from Chestnut Products

Acrylic Sanding Sealer Aerosol 400ml (CASS)
£7.25
Add to basket
Acrylic Sanding Sealer (not aerosol) 500ml (CAS500)
£10.95
Add to basket
 

Acrylic Sanding Sealer

Typical uses To seal open pores of timber prior to application of lacquers, waxes or polishes.

Once dry lightly sand for a smooth surface. Method of application Foam Brush, Brush, cloth or spray.

Drying time Within twenty minutes under normal conditions. Coverage Approx. 8-10 m² per litre. (1-2 m² per spray can).

Compatibility Can be used as a basecoat for Acrylic Gloss Lacquer, Acrylic Lacquer, Ebonising Lacquer, Acrylic Satin Lacquer, WoodWax 22

One coat should be sufficient to seal the piece you are working on. It is not advisable to apply more than one coat, especially when using a ‘hard’ topcoat (i.e. lacquers). Thinning may be required when applying over a large area. Thinners Water.

400ml Aerosol or 500ml Liquid from Chesnut Products

** Flammable items will have to be sent using a courier. Please note surcharge areas may incur an extra charge see Postage

Acrylic Sanding Sealer from Chestnut Products