Home > Model Aircraft > Balsa Model Kits > West Wings Hawker Sea Fury + Free Knife and Glue FB11 Wooden Balsa Kit

Balsa Model Kits

West Wings Hawker Sea Fury + Free Knife and Glue FB11 Wooden Balsa Kit

Hawker Sea Fury FB11 (WW03OFFER)

£26.99

Balsa Cement 35g (BC/L)

£3.49

Tissue Paste (AD60)

£4.99

Deluxe Materials Eze Dope 250ml (BD42)

£7.99

Hawker Sea Fury FB11 Balsa Plane Kit from Westwings + Free Knife and Glue

 

The last of Britain's piston engined fighters, and to many, one of the most elegant too, the Sea Fury was born of a time when jets were gaining favour in the military, yet still had sufficient performance to be effective. In fact, a Royal Navy Sea Fury was the first aircraft to shoot down a Mig 15 in combat.

Our version of the Sea Fury has the good scale outline of the original yet retains excellent flying attributes from careful attention to detail and effective design. The characteristic 'elliptical' wing is faithfully followed and combined with an effective wing section, gives good lift with minimal drag. Despite that elliptical shape, the wing still retains good slow speed performance and is not prone to tip stalling.

Construction is in three sections to faithfully recreate the shape of the original. Wing ribs and trailing edges are printed on balsa sheets for easy cutting and accurate assembly. The fuselage is built up from balsa formers that need to be cut from the printed balsa sheets provided. Careful choice of wood makes this a joy rather than a chore. Each half shell is assembled over the plan and then joined together at the end.

Areas so characteristic to the Sea Fury, such as the exhaust shields, are reproduced with balsa sheet to make accurate scale details that set our kits apart from other makes. You can choose to fit a 'knock off' scale undercarriage or leave her 'clean'. The parts are there, it's your choice! You've even got a printed instrument panel that is accurate and adds a stunning feature on such a small model. With such a nice canopy to view it, it would be a crime to leave it out.

Give the Sea Fury a go, we know you'll not be disappointed!

Wingspan - 21.6"/549mm

Scale - 1:21

Power - Rubber

The kit contains all the required items of hardware such as wire, wheels, propeller, rubber and tissue covering.

As is usual with this kind of kit, you will still need to purchase glue (BC/L), dope (NCD), Dope Thinners (NCD/T) and Tissue Paste (AD60).

West Wings Hawker Sea Fury  + Free Knife and Glue FB11 Wooden Balsa Kit
West Wings Hawker Sea Fury  + Free Knife and Glue FB11 Wooden Balsa KitWest Wings Hawker Sea Fury  + Free Knife and Glue FB11 Wooden Balsa Kit

View more products from West Wings