Caldercraft HMS Jalouse (HPS/9007)
Paint Set for HMS Jalouse 5 x 18ml pots (APS9007W)
The Caldercraft HMS Jalouse kit features:
- Double plank on bulkhead construction, Keel and bulkheads are CNC cut in Birch ply as are all the major constructional parts. Extensive use of CNC cut Walnut has been employed for the majority of structures and fittings.
- The wood pack contains Lime for the first planking, Walnut for the second planking and Tanganyka for the decks. Ramin dowel is supplied for the masts and yards.
- Scale 6pdr gun carriages, 18 Brass 6pdr guns. The gundeck features two Elm tree pumps, pre-cut wood grating kit, pre-cut capstan kit, pre-cut pin rails, wooden belaying pins.
- Rigging thread is supplied in natural and black to rig the model as depicted in the photographs.
- Blocks, deadeyes, etched brass chainplate assemblies with strops, shroud cleats, trucks, stunsail yard brackets as well as CNC cut Walnut tops, crosstrees, trestle trees, mast caps and a wealth of unique detail parts.
- Full size plans and comprehensive instruction book.
- Kit shown as fitted out for Royal Navy service
- Scale: 1:64
- Length: 815mm
- Width: 310mm
- Height 600mm
- Planking: Double
- Part No: C9007
The French brig sloop La Jalouse was launched in Dunkirk in 1794. She is a typical large French brig used for convoy, raiding and escort duty. She was taken by the British vessel Vestal on 13th May 1797 and re-named Jalouse. She was then fitted out for duties in the Royal Navy. The only features that distinguished her as being of French origin were the 90° angle to the keel of the rudder post and the tops and crosstrees and trestletrees. After ten years in British service, she was broken up in 1807. Jalouse had a compliment of 121 officers and men. She carried 18 x 6 pounder guns, although the armament may well have been replaced by 18 x 32 pounder carronades sometime after her capture.
Her dimensions were as follows:
102' 10" long
85' 4" keel length
27' 9" wide
12' 11.5" draught