Ton 12 Krabbe Kit 2141 (G2141)
Sorry, this product is currently unavailable. Please check back later
The Graupner crab-fishing cutter TÖN 12 KRABBE is a fishing vessel mainly operated in the North Sea. It is specifically designed for fishing crabs and carries a special type of purpose-designed rigging for the job. The large fishing nets are carried by two outrigger booms, heaved up almost to the mast during the run to the fishing grounds.
The model is scaled down to 1:25 scale from original plans and so configured as to satisfy even the most demanding modeller. The moulded hull contained in the kit, as well as the rudder- and keel shells and the crab cooking gear of touch plastic plus many injection-moulded plastic parts simplify the completion of the model and shorten the time requiring for building it. Equipped with its properly matched E-motor the model travels commendably fast.
Contents of the Quickie kit
Quickbuild plan, R/C installation plan, building instructions incl. R/C installation instructions in English, French, German and ltalian. Moulded hull, keel- and rudder shells, crab cooking gear of ABS plastic, printed and die-cut wood parts, moldings, window glazing, wires, metal sheets, flag, net, decal, miscellaneous parts.
Length 484 mm
Width 170 mm
Draught 50 mm
Displacement max. (total weight, incl R/C gear) 1.27 kg
Weight, empty (excl. main drive battery and R/C equipment 0.45 kg
Also consider the optional detail fittings pack for the Graupner Krabbe to add those all important finishing touches.
Recommended equipment for this model:
Graupner Speed 280 Motor (G6328)
Viper Marine 15amp Speed Controller (Ref: RCM/15)
2 X Graupner 4.8v/3000 mAh NiMH Batteries (Ref: G2596.4)
Transmitter/Receiver set (Ref: RCT1)
For props, propshafts and couplings please look in the running gear section