Veritas Super Hard Milled Scrapers

Veritas Super Hard Milled Scrapers (476257)
£11.46
Add to basket
 

Veritas Super Hard Milled Scrapers

  • Hardened to HRC 48-52 to hold an edge longer
  • Edges are carefully milled to a square, sharp 90°
  • Prepared edges save time and effort of filing and stoning
  • Comes in set of four
  • 50 x 150 x 0.4 & 0.6mm for fine work
  • 60 x 150 x 0.8 & 1mm for heavier stock
  • 1mm scraper suitable for paint removal

Whereas most cabinet scrapers are sheared from spring steel and hardened to HRC 38-42, these Veritas scrapers are harder (HRC 48-52) and hold an edge longer. Their edges are carefully milled to a square, sharp 90°. The set includes four thicknesses: for fine work, 0.4mm(0.016") and 0.6mm(0.024") thick, each 50mm x 150mm(2" x 6"); for heavier work, 0.8mm(0.032") and 1mm(0.042") thick, each 60mm x 150mm(2.3/8" x 6").

Veritas Super Hard Milled Scrapers