Veritas MK.2 Honing Guide System M0901

Veritas MK.2 Honing Guide System M0901 (200810)
£37.96
Add to basket
 

Veritas MK.2 Honing System

  • Increased range, capacity and accuracy
  • Integral blade registration squares the blade and sets the bevel angle in one easy step
  • Three bevel-angle range configurations
  • Designed to accept flat and tapered blades, as well as blades with irregular geometry
  • Three-position eccentric roller allows a micro-bevel to be honed quickly and accurately
  • 50mm wide roller is stable for even the narrowest of blades
  • Accommodates chisels as narrow as 6mm, and blades as wide as 72mm and up to 13mm thick
  • Works with short blades such as spokeshave blades
  • Manufactured from die-cast zinc alloy, with precision-machined brass and steel parts

The main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step. The Mk.II Guide has three bevel angle range configurations: a high angle (25° to 54° in seven increments), standard (15° to 40° in six increments), and a third for back bevels. The registration jig slides onto the guide body, centering and squaring the blade using an integral fence. The clamping mechanism registers on the face of the blade and is designed to accept flat and tapered blades, as well as blades with irregular geometry. The Mk.II features a three-position eccentric roller allowing a micro-bevel to be honed quickly and accurately after only a simple turn of a knob. The 50mm wide roller is stable for even the narrowest of blades. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Sharpening stone not included

Veritas MK.2 Honing Guide System M0901
Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901Veritas MK.2 Honing Guide System M0901