Veritas Plane Blades

57mm 2.1/4" O1 25° Bevel (702020)
£27.96
Add to basket
57mm 2.1/4" O1 38° Bevel (702022)
£27.96
Add to basket
57mm 2.1/4" A2 50° Bevel (702023)
£27.96
Add to basket
57mm 2.1/4" A2 Toothed (702025)
£33.46
Add to basket
 

Veritas Plane Blades

Bevel-Up Bench Plane Blades

  • Blades to fit Veritas planes
  • A2 or O1 tool steel
  • Lapped to a flatness tolerance of 0.005mm(0.0002")
  • Optional 38° and 50° bevel blades, 38° toothed blade available for some models

Blades to fit Veritas planes, made of either A2 or O1 tool steel. They are lapped on the non-bevel side to a flatness tolerance of 0.005mm(0.0002") or better over the working surface, and with an average roughness surface finish of 0.000125mm(5 microinches (0.000005")) or better. Optional 38° and 50° bevel blades and a 38° toothed blade are available for some models. The 38° bevel blade yields an effective cutting angle of 50° (commonly known as a York pitch) and is excellent for general smoothing. The 50° bevel blade is best for working difficult or reversing grain, and the combined cutting angle of 62° produces a Type II chip that eliminates tear-out. The toothed blade is for working difficult grain, especially knots.

Veritas Plane Blades