Veritas Detail Flush Cutting Saws

Double Edge (475855)
£15.96
Add to basket
Single Edge (504598)
£12.46
Add to basket
 

Veritas Detail Flush Cutting Saws

  • Used to cut off a projection
  • Teeth set one way, no damage to surface
  • 22Tpi Japanese style toothed blade
  • Blade can be pressed flush
  • Rigid enough to corner
  • Overall length 290mm(11.1/2") with 120mm(4.3/4") blade

Traditionally used for the rapid trimming of plugs and dowels flush with a surface, these flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only. The 22tpi Japanese tooth pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control. The saw is available with teeth cut on only one edge or in a double edged style that cuts from either side. Each is about 290mm long with 120mm of blade. These work like a charm.

Veritas Detail Flush Cutting Saws
Veritas Detail Flush Cutting SawsVeritas Detail Flush Cutting Saws