Gaugemaster Prodigy Advance2 Starter Package

View more products from Gaugemaster

Want it on Thursday, 30th January? Place your order within 3 hrs 10 mins and select Next Day Delivery at the checkout.

Gaugemaster Prodigy Advance2 Starter Package (DCC02)
£349.95
Add to basket

Gaugemaster Prodigy Advance2 Starter Package

PRODIGY ADVANCE2 consists of three elements. The POWER PACK transforms the power from your mains socket ready for the Base Unit. The BASE UNIT is the brains behind the operation. It contains all the technology you need to send DCC commands to your trains and accessories. However, short of turning the power on and off, you'll find your closest companion is the Walkaround controller which plugs straight into the Base Unit.

The WALKAROUND is a hand-held controller that you use to send your commands to the Base Unit, which then sends them on to the relevant decoder on your layout. You control the speed and direction of your trains from here. One of the key features of DCC operation is that each of your locomotives has a numeric address which you select as and when you want to run that locomotive.

DCC allows you to run it anywhere on your railway at the same time as other trains are moving as well. You can operate points (individually or route set) and signals from the Walkaround. You can use it to programme your decoders to replicate the running characteristics of your locomotives, or even introduce a speed clock that allows you to run a 24 hour timetable within one operating session.

The possibilities are almost endless with DCC and with locomotives becoming available with factory-fitted decoders as standard, we are entering an exciting new era. Of course, you can also retro-fit your older locomotives with decoders if you wish.

The handset in this pack is fitted with a clear and bright blue backlit display, ideal for users operating a railway in less than ideal lighting conditions.

Stuck where to put your DCC Controller? you can now attach it to your layout using the dcc66 Prodigy Controller Caddy. This unit has been designed to screw directly to your baseboard and will fit most DCC Controllers and even mobile phones.

Technical:

DCC TRACK VOLTAGE 15v DC
CURRENT RATING 3.5A
ADDRESS CAPABILITY 2 and 4 Digit
SPEED STEPS 14 - 28 - 128
ACCESSORY FUNCTIONS 1 - 255


Handset Measurements:

LENGTH 190mm
WIDTH 80mm
HEIGHT 20mm


Base Unit Measurements:

LENGTH 180mm
WIDTH 120mm
HEIGHT 60mm


Other Unit Measurements:

MAINS CABLE LENGTH 1m
FLAT CABLE LENGTH 1m