Proxxon FD 150E Metal Working Lathe 502015

View more products from Proxxon

Lathe Only (24150)
£484.95
Add to basket
Proxxon 6 Piece Cutting Tool Set (24524)
£57.50
Add to basket
Proxxon Rohm Drill Chuck (24152)
£19.95
Add to basket
Proxxon Er 11 Collet Set (24154)
£91.50
Add to basket

Proxxon FD 150/E Metal Working Lathe 230V 24150

  • Accurate bed made from cast aluminium
  • Spindle made from diecast aluminium
  • Speed range of 500-5000rpm
  • Headstock suitable to take ER11 collets
  • Tailstock has a MK0/short bore
  • Quick change tool post for 6mm tooling
Specification for Proxxon FD 150/E Lathe:
Cross Slide Travel(X) 40mm, (Z) 60mm
Distance Between Centres150mm
Height Over Cross Slide33mm
ModelFD 150/E
Nett Weight4.5kg
Overall L x W x H360 x 150 x 150mm
Speed Range500 - 5000rpm
Spindle Bore8.5mm
Spindle SpeedMK0/short bore

The Proxxon FD150/E is a compact metal working lathe for facing and longitudinal turning, boring, taper turning, parting and drilling. The high maximum speed (5000rpm) allows very small diameters to be machined. The lathe has an accurate bed made from cast aluminium and the spindle from diecast aluminium. It is run using a powerful, quiet running DC motor which has a two stage belt drive used in conjunction with an electronic speed control to achieve the full speed range (500-5000rpm). The main spindle runs with precision bearings and has a continuous bore of 8.5mm. A three jaw self-centring chuck is supplied with an inside jaw range of 1.5-32mm and 12-65mm outside. The tailstock comes with a live centre and has an MK0/short bore. There is a quick change tool post with the machine accepting 6mm tooling.